Download Spartan Catalog Files
 


Terms of Sale


Spartan Catalog


Spartan Overview

Products

Spartan Scientific offers a large selection of solenoid valves and solenoid valve accessories. To use our solenoid valves and solenoid valves accessories section, click on the category name or use the configurator to let us help with your selection.



Solenoid Valve Operators

Direct Acting Solenoid Valves

Diaphragm Process Solenoid Valves

Media Separated Solenoid Valves

Media Separated Air Piloted Valves

Air Piloted Valves

Condensation Removal Drain Valves

Proportional Flow Control Valves

Sales Aids

Featured on Social Media


Series 1500

The Spartan Scientific Series 1500 is a 15 mm wide 2-Way & 3-Way, 2-Position solenoid valve which features small size with large flow and consistent, repeatable function. Available in orifice sizes 0.8, 1.0, 1.1 and 1.5 mm, the Series 1500 can flow up to a Cv of 0.04 and offers pressure range from 0 to 145 PSI in the 2.5 watt versions. The 9.4 mm electrical pin spacing is an industry standard. The valve body is made from durable thermoplastic and comes standard with a push non-locking manual override. Featuring an environment resistant IP 65 rating, the valve can withstand humid and dirty conditions. The Series 1500 features a captured exhaust port that is connected through the sub-base. Available in 12 or 24 VDC or 24, 110 and 220 VAC, the Series 1500 boasts power consumptions of 1.0 to 2.5 watts.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 3800

The Spartan Scientific Series 3800 solenoid operators are specially designed for the pilot function of 3-Way & 4-Way pneumatic directional control valves. Available in plate mount, the operators are interchangeable with most solenoid operator interfaces. Sealing discs are spring compensated. Shading ring is standard so that both AC and DC coils can be used on all armatures. Coils are Glass-Filled Nylon encapsulation.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 38KRE

The Spartan Scientific Series 38KRE is a miniature solenoid operator pilot assembly designed to control inert gases and liquids and is made to easily mount to a flat manifold surface. The 38KRE features a fully molded coil assembly that is available in spaded or flying lead configurations. The plunger and tube assembly are made from highest quality materials and exacting standards for long life and reliability. The valve body comes with turn locking manual override as standard. It can be assembled quickly to a manifold block by the use of two screws (provided). Features the DIN 43650 Form “B” Industrial Standard quick connect interface.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 40A0

The Spartan Scientific Series 40A0 solenoid valve operators are used as 2-Way & 3-Way, 2-Position Normally Closed or Normally Open, functions for the control of air, light oil, water and inert gases. The robust design incorporates all stainless steel stop, plunger and tube assembly as well as spring compensated top seat. Available in 0.8mm (0.03 Cv) to 6.0mm (0.72 Cv) orifice sizes, the 40A0 can control a broad range of flow and pressure ratings. Standard elastomers are FKM, NBR and EPDM. The class F coils are all nylon encapsulated, 100% duty, all standard voltage and are available in DIN 43650 Form “A”, flying lead, DIN form A connector, 1/2” conduit. Available in UL recognized and CSA approved as well as other institutional approvals and oxygen cleaned upon request.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 5000

The Spartan Scientific Series 5000 solenoid valve operators are used as 2-Way & 3-Way, 2-Position Normally Closed or Normally Open, functions for the control of air, light oil, water, and inert gases. The robust design incorporates all stainless-steel stop, plunger and tube assembly as well as spring compensated seats for long trouble-free life. Available in 0.6mm (0.025 Cv) to 4.0mm (0.45 Cv) orifice sizes, the 5000 can control a broad range of flow and pressure ratings. Standard elastomers are FKM, NBR and EPDM along with NSF seal options. The class F coils are all nylon encapsulated, 100% duty, all standard voltage and are available in DIN Style “A” EN175301-803 (Formerly DIN 43650), flying lead, 1/2” conduit.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 3822

The Spartan Scientific Series 3822 is a metal body solenoid valve offered in both 2-Way & 3-Way, 2-Position Normally Closed or Normally Open functions and eight orifice sizes. Component features include the proven Series 3800 solenoid operator available in brass/stainless steel or all stainless steel pilot design, optional seal materials and Glass-Filled Nylon encapsulated coil in both DIN spade and flying lead. The “basket” orifice design feature allows the possibility of changing the orifice diameter to meet flow requirements within a matter of seconds. The rugged metal body coupled with the high cycle life, proven solenoid meet to make a solid solution for media and inert gas control. Available in all standard voltages, the valve saves energy while giving you the confidence of high quality in small envelope size.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 3825

The Spartan Scientific Series 3825 is a composite body solenoid valve featuring integrated .250 inch O.D. quick connect tube fittings right in the valve body. Advantages include reduced leak points and a lower installation cost. Additional features include 2-Way & 3-Way, 2-Position function in either Normally Closed or Normally Open, Mixing or Diverting versions. This versatile series incorporates the orifice basket technology ensuring rapid assembly of many orifice sizes from 0.6 to 3.0 mm. A unique option is that this valve can be made with an externally adjustable flow control effectively giving the operator the ability to dial in a custom flow rate after the valve has been installed in the application. The valve coil is available in all standard voltages with flying leads or DIN quick connect and all versions are fully nylon encapsulated. The 3825 is available in media compatible materials that include stainless steel, or brass, and FDA and NSF approved thermo-plastics. Many seal materials are available with FKM as standard.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 3827

The Spartan Scientific Series 3827 is a composite body solenoid valve offered in both 2-Way & 3-Way, 2-Position Normally Closed or Normally Open functions and eight orifice sizes. Component features include the proven Series 3800 solenoid operator available in brass/stainless steel or all stainless steel pilot design, optional seal materials and nylon encapsulated coil. The "basket" orifice design feature allows the possibility of changing the orifice diameter to meet flow requirements within a matter of seconds. The composite material is media compatible, eliminating the need for stocking multiple body materials. Useful in medical and ventilator devices.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
PRODUCT
VIDEOS
Series 3922

The Spartan Scientific Series 3922 is a 2-Way & 3-Way, 2-Position Normally Closed solenoid valve for control of air, caustics, inert gases, oil, and water. Constructed from highest grade materials, the Series 3922 features a completely glass filled nylon encapsulated coil, stainless steel plunger and stop, and spring compensated plunger seals for long trouble free service. Key to the 3922 is a stackable body giving the customer the ability to build manifolds as needed using one inlet and many outlets. The 3922 is available in orifice sizes from 0.6 (0.02 Cv) to 2.4mm (0.24 Cv). Seat materials are EPDM, FKM and NBR standard. Coils are class F 100% duty and incorporate the DIN 43650 industrial quick connect, DIN 43650 Female or flying leads. The valve body is made from robust zinc-aluminum die casting and comes standard with 1/8” NPT connections. The body is designed to incorporate our interchangeable “basket” style orifice simplifying valve assembly and re-fit. The Series 3922 is a long life, low cost solution to many automation applications.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 3923

The Spartan Scientific Series 3923 features a fully encapsulated coil, spring compensated plunger seats for long life, and a miniature stackable composite valve body. Key to the 3923 is a stackable body giving the customer the ability to build manifolds as needed using one inlet and many outlets. The 3923 is available in orifice sizes from 0.6 (0.02 Cv) to 2.4mm (0.24 Cv). Seat materials are EPDM, FKM and NBR standard. Coils are class F 100% duty and incorporate the DIN 43650 industrial quick connect, DIN 43650 Female or flying leads. In most cases the Series 3923 reduces inventory costs and lowers cost per installation over a conventional manifold valve series.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
ADDITIONAL
RESOURCES
Series 4290

The Spartan Scientific Series 4290 is a 2-Way & 3-Way, 2-Position Normally Closed or Normally Open solenoid valve for electrical control of air, caustics, inert gases, oil, and water. Constructed from highest grade materials, the Series 4290 features a completely glass-filled nylon encapsulated coil, stainless steel plunger and stop, and spring compensated plunger seals for long trouble-free service. Key to the Series 4290 is a stackable body giving the customer the ability to build manifolds as needed using one inlet and many outlets. The Series 4290 is available in orifice sizes from 0.8mm to 3.0mm. Seat materials are EPDM, FKM and NBR standard. The class F coils are 100% continuous duty, all standard voltages, and are available in DIN 43650 Form “A” or flying leads. The valve body is made from robust CPVC or Aluminum and comes standard with 1/4” NPT connections. The Series 4290 is a long life, low cost solution to many automation applications.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
ADDITIONAL
RESOURCES
VIEW
PRODUCT
VIDEOS
Series 6100

The Spartan Scientific Series 6100 is a 2-Way, 2-Position direct acting In-Line style solenoid valve utilizing a long-life spring compensated solenoid poppet at the heart of an all stainless steel solenoid operator. The standard body material is brass and is available in 1/8” and 1/4” NPT. With orifice sizes ranging from 0.8mm up to 3.0mm standard, the 6100 valve can handle a wide variety of flow rates as well as pressure ranges from 0 to 600PSI in various versions. The Series 6100 employs use of the orifice basket design unique to Spartan Scientific valves which allows for quick change-over for production of any orifice size as standard. This aids in versatility of valve manufacture and increases valve availability. The brass valve body is of robust design and is compatible with liquids and gases at lowest possible cost. All common voltages are offered as well as electrical connection styles which include a DIN 43650 spaded coil as well as flying lead styles. Coils are sealed to IP 65.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 6200

The Spartan Scientific Series 6200 is a 2-Way or 3-Way, 2-Position direct acting solenoid valve utilizing a long life spring compensated solenoid poppet at the heart of an all stainless steel solenoid operator (430FR and 316SS). Standard body material is Glass-Filled Nylon. With orifice sizes ranging from 0.8mm up to 6.0mm standard, the 6200 valve can handle a wide variety of flow rates as well as pressure ranges from 0 to 250PSI in various versions. Offered with or without manual override, the Series 6200 employs use of the orifice basket design unique to Spartan valves which allows for quick change-over for production of any orifice size as standard. This aids in versatility of valve manufacture and increases valve availability. The composite valve body is of robust design and is compatible with liquids and gases at lowest possible cost. The ports available are 1/8", 1/4", 3/8" NPT standard. All common voltages are offered as well as electrical connection styles which include a DIN 43650 spaded coil as well as flying lead styles. Coils are sealed to IP 65. Valve functions include Normally Closed, Normally Open, Mixing and Diverting.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
ADDITIONAL
RESOURCES
VIEW
PRODUCT
VIDEOS
Series 6222

The Spartan Scientific Series 6222 solenoid valves are used as 2-Way & 3-Way, 2-Position, Normally Closed, Normally Open, Mixing or Diverting functions for the control of air, caustics, inert gases, oil, and water. The robust design incorporates all stainless steel stop plunger and tube assembly as well as spring compensated top seats installed in a low-lead brass forged body with 1/8”, 1/4” and 3/8” NPT ports standard. Available in 0.8mm (0.03 Cv) to 6.0mm (0.72 Cv) orifice sizes, the 6222 can control a broad range of flow and pressure ratings. Standard elastomers are EPDM, FKM or NBR for media compatibility. The class F coils are all Glass-Filled Nylon encapsulated, 100% duty, all standard voltages, and are available in DIN 43650 Form “A”, flying lead, DIN form A connector with 1/2” conduit.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 3505

The Spartan Scientific Series 3505 is a 2-Way, 2-Position, internally piloted solenoid valve for the control of air, emulsion, inert gases and water. The valve features an all brass body and a full flow 1/2” orifice while maintaining a 1.5 minimum pressure differential. The design allows for a tight seal on the orifice at 0 psi. Available in 1/4”, 3/8” and 1/2” NPT, the 3505 can handle pressures to 230 psi. The encapsulated coil construction ensures that the valve functions well under long periods of activation (100% duty), as well as providing a high degree of environmental protection (NEMA 4). The inner valve functions as a direct assist using a flat diaphragm and orifice plate. Pressure differentials shift the valve to full open or full closed. A push, non-locking manual override is standard.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 3510

The Spartan Scientific Series 3510 2-Way, 2-Position, internally piloted solenoid valve uses the latest technologies for materials and function. This combination provides the user with the highest quality, smallest size per Cv of flow and most competitive pricing of any valve on the market. The 3510 gives full flow throughout the pressure range starting with a Maximum Operating Pressure Differential of 1.5 psi while remaining sealed at 0 psi. The body is available in 1/4", 3/8" and 1/2" NPT sizes and features a stainless steel anti-flex ring for port strength. The molded pilot section features a push, non-locking manual override, high cycle life solenoid parts, and quick connect DIN Style “A” EN175301-803 (Formerly DIN 43650) or “flying lead” electrical connection options. Typical applications include air, emulsion, inert gases, oil and water control, condensate drainage, hot water plumbing and sprinkler systems.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 3516

The Spartan Scientific Series 3516 2-Way, 2-Position Normally Closed or Normally Opened solenoid diaphragm process valve offers the highest flow for the smallest overall size in its class as compared to competitive units. The valve is designed from the ground up using modern design technologies and materials. The potable water brass body is media compatible, rugged and virtually indestructible. The body is available in 1/4”, 3/8” and 1/2” NPT. The low wattage solenoid features a DIN Style “A” EN175301-803 (Formerly DIN 43650) electrical interface and is nylon encapsulated. FKM, EPDM and NBR are standard elastomers and the operators are made of stainless steel / brass or stainless steel / brass with copper shading rings for AC versions. Typical applications include control of inert gases, water and compatible fluids.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
ADDITIONAL
RESOURCES
Series 3580

The Spartan Scientific Series 3580 is an engineered composite 2-Way, 2-Position solenoid/air operated valve designed for the control of liquid media and inert gas. The valve exhibits a large 1/2” orifice and three port sizes standard, 1/4", 3/8” and 1/2” NPT. The Normally Open version of the 3580 has a unique operator that allows for function without the use of a bypass tube as with the 3510 and has a push non-locking and a turn-lock manual override. There is no override available on the Normally Closed version of this valve. The valve’s compact design utilizes the latest in material sciences with the use of composite materials in the valve body. The solenoid pilot is power saving low wattage, made of stainless steel working components and is miniaturized to fit in tight places. Standard elastomers available are FKM, NBR, and EPDM. The fully encapsulated coils are available in all standard voltages and with spaded, flying leads or with a connector attached. Typical applications are for installations where there is a need to control inert fluids and gases, condensate drainage, hot water plumbing and sprinkler systems.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 3585

The Spartan Scientific Series 3585 2-Way, 2-Position solenoid diaphragm valve offers the highest flow for the lightest weight in its class. The valve is designed from the ground up using modern design technologies and materials. Featuring a full flow 1/2” (12.5 mm) orifice, the 3585 is available in either Normally Closed or Normally Open configurations. The nylon body is media compatible, light in weight, and by use of external metal port rings, is virtually indestructible. The Normally Open version of the valve features an optional turn lock manual override and has no external by-pass tube which eliminates leak points and size. The body is available in 1/4”, 3/8” and 1/2” NPT or BSP. The low wattage solenoid features a DIN 43650 Form A electrical interface and is nylon encapsulated. FKM, NBR and EPDM are standard elastomers and the operators are made of stainless steel / brass or stainless steel / brass with copper shading rings for AC versions. Typical applications include control of inert gases, water and compatible fluids.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 35G5

The Spartan Scientific Series 35G5 2-Way, 2-Position all stainless-steel solenoid diaphragm valve offers the highest flow for the smallest size in the industry, with the 316 stainless steel body and bonnet. The valve is designed from the ground up using modern design technologies and materials. Featuring a full flow 1/2” (12.5 mm) orifice, available in Normally Closed configurations. The rugged stainless body is media compatible, robust, and is designed to meet rigorous flow requirement up to 29 GPM @ 150 PSI water. The body is available in 1/4”, 3/8” and 1/2” NPT, and the low wattage solenoid features a DIN Style “A” EN175301-803 (Formerly DIN 43650) electrical interface and is nylon encapsulated. FKM, NBR and EPDM are standard elastomers, and the operators are made of stainless steel with copper shading rings for AC versions. Typical applications include control of inert gases, water, and compatible fluids.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
ADDITIONAL
RESOURCES
Series 35KR

The Spartan Scientific Series 35KR 2-Way, 2-Position solenoid valve is a variation on the popular Series 3500 valves which feature miniaturized size vs. flow rate while allowing the user to manifold multiple outlets with one inlet. The 35KR design features the direct pilot design which controls 0 to 150 PSI in the all plastic version. The intermediate orifice plate design is the key to the 35KR in that it includes all the details of careful orifice design and creates a simple sealing pattern which can be mounted to integrated equipment and complex manifolds with simple mounting screws. The mounting style reduces leak points and numbers of connections. The 12mm orifice promotes full flow while the valve body, at only 1.5 inches wide, can be gang mounted to give impressively small envelope packages with many outputs. The simple mounting pattern is shown under dimensional data and can be machined into many varied manifold configurations.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 3680

The Spartan Scientific Series 3680 2-Way, 2-Position solenoid diaphragm valve offers the highest flow for the smallest overall size in its class. The valve is designed from the ground up using modern design technologies and materials. Featuring a full flow orifice, the 3680 is available in either Normally Closed or Normally Open configurations. The PEI body is media compatible, light in weight, and by use of external metal port rings, is virtually indestructible. The Normally Open version of the valve features an optional turn lock manual override and has no external by-pass tube which eliminates leak points and size. The body is available in 3/4” and 1” NPT. The low wattage solenoid features an Industry Standard 22 mm wide coil electrical interface and is nylon encapsulated. FKM, EPDM and NBR are standard elastomers and the operators are made of stainless steel / brass or stainless steel / brass with copper shading rings for AC versions. Typical applications include control of inert gases, water and compatible fluids.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 3685

The Spartan Scientific Series 3685 2-Way, 2-Position solenoid diaphragm valve offers the highest flow for the smallest overall size in its class. The valve is designed from the ground up using modern design technologies and materials. Featuring a full flow orifice, the 3685 is available in either Normally Closed or Normally Open configurations. The PEI body is media compatible, light in weight, and by use of external metal port rings, is virtually indestructible. The Normally Open version of the valve features an optional turn lock manual override and has no external by-pass tube which eliminates leak points and size. The body is available in 3/4” and 1.0” NPT. The low wattage solenoid features a DIN 43650 Form A electrical interface and is nylon encapsulated. FKM, EPDM and NBR are standard elastomers and the operators are made of stainless steel / brass or stainless steel / brass with copper shading rings for AC versions. Typical applications include control of inert gases, water and compatible fluids.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 45A0

The Spartan Scientific Series 45A0 2-Way, 2-Position Solenoid Valve is a brass bodied, stainless steel operator valve for electronic control of air, water or any seal compatible media. The versatile design is feature rich including with and without manual override, EPDM, FKM and NBR sealing materials and slow close anti-water hammer options. Additional special options include oxygen clean, and latching versions. Valves are available in 1/4”, 3/8” and 1/2” NPT and all standard AC and DC voltages. Coils are fully encapsulated and are available standard with flying lead and DIN 43650 form A with wire grip or 1/2” conduit as options.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 6700

The Spartan Scientific Series 6700 2-Way, 2-Position process type solenoid operated diaphragm valve offers the highest flow for the smallest overall size in its class in an all brass body form. The valve is designed from the ground up using modern design technologies and materials. The heart of the design uses a rolling diaphragm which exhibits superior flow for size. Featuring a full flow 28.58mm (1.13") orifice, the 6700 is available in Normally Closed configurations. The all brass body construction is available in 3/4" and 1.0" NPT port configuration with a maximum of 14 Cv (maximum flow is 53.3 GPM @ 120 PSI), This design is virtually indestructible when using clean media and proper environment. Typical applications include 2 way control of inert gases, water and compatible fluids.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
ADDITIONAL
RESOURCES
Series 3B23

The Spartan Scientific Series 3B23 is a compact, media separated 2-Way Normally Closed solenoid valve for use with air, chemicals, gases or water whereby the media is contained in the nylon body valve cavity and does not come into contact with the metal parts of the solenoid operator. The 3B23 features a long life solenoid that incorporates a fully encapsulated coil, stainless steel plunger and tube assembly as well as a rolling diaphragm which enables the valve to function at pressures up to 120 psi with orifice size of 1.2mm and a flow rate of 0.06Cv. The single in-line valve body features metal reinforced 1/8”NPT threads and has an ultra small volume and simple flow path for clean switching. The valve is available in all standard voltages and comes standard with a 6.5 watt coil..
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 4B23

The Spartan Scientific Series 4B23 is a media separated, 2-Way 2-Position solenoid operated valve where the media remains isolated from the metal working components within the valve. This creates a barrier to contamination to both the fluid and the operator which serves two purposes. The media remains untainted by the metals in the operator while the close tolerance moving parts of the valve are insulated from the effects of particulates, aggressive chemicals which can affect long term life of solenoid valves. The 4B23 is available in 1/4” or 3/8” NPT connections with orifice ranges from 2.0mm to 5.0mm which gives the 4B23 great flow and operating pressure ranges to meet differing applications. The 4B23 features a DIN quick connect coil or flying leads connection. The valve is designed for long trouble free life with the incorporation of a rolling type diaphragm, life cycle proven metal operator components and a fully encapsulated coil system. The Valve is available in Normally Closed or Normally Open configurations and has two body ports for convenient fluid connection.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
ADDITIONAL
RESOURCES
Series 4BKR

The Spartan Scientific Series 4BKR is a 2-Way, 2-Position media separated solenoid valve that is used for the control of ultra pure or corrosive media that would otherwise cause premature failure on wetted type solenoid valves. Featuring the Spartan Scientific low volume valve cavity and the rolling diaphragm, the 4BKR has no convolutions for chemicals to congregate or dead spots for flow. The all encapsulated coil, stainless steel tube and plunger assembly are designed for a long trouble free life. Also featuring a quick connect interface, the valve can be mounted in a gang style on a manifold block by using four fasteners and two o-rings.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 4D85

The Spartan Scientific Series 4D85 is a direct operating 2-Way 2-Position media separated valve for control of aggressive media that can damage wetted solenoid valve components . The valve incorporates the innovative Spring Diaphragm which retains the media in the valve body effectively separating the metal operator components from the media for extremely long life cycles and media compatibility. The 4D85 is a stand alone body ported valve, available in 1/4”, 3/8”, and 1/2” NPT port connections and offers a full flow 12.5mm orifice. The 4D85 can control media compatible with Glass-Filled Nylon, PEI, and FKM, EPDM, and NBR elastomers. Available in all standard voltages, the 4D85 can control up to 20 PSI inlet pressure with no minimum operating pressure differential. The fully nylon encapsulated coils are available in DIN 43560 Form “A” and flying leads. The 4D85 valve body features robust design elements such as all stainless hardware and metal reinforced port rings which virtually eliminate valve body damage. The 4D85 is designed for a long trouble free life while still controlling compatible aggressive fluids.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series 4DKR

The Spartan Scientific 4DKR is a direct operating 2-way 2-position media separated valve for control of aggressive media that can damage wetted solenoid valve components. This unique valve design incorporates the innovative Spring Diaphragm which retains the media in the valve body effectively separating the metal operator components from the media for extremely long life cycles and media compatibility. The 4DKR is a sub-based valve designed to be mounted on a manifold machined to match the design template for mounting screws and flow paths. The design is made so that the manifold can be easily machined using common tools so that common passageways can be machined in a block with one inlet and many outlets reducing the size needed for an installation as well as leak points and fittings with corresponding labor. The valve offers a full flow 12.5mm orifice and can control media compatible with Glass-Filled Nylon, PEI, FKM, EPDM, and NBR elastomers. Available in all standard voltages, the 4DKR can control up to 20 PSI inlet pressure with no minimum operating pressure differential. The fully nylon encapsulated coils are available as DIN 43560 Form A or flying leads. The 4DKR valve body features robust design elements such as all stainless hardware and is designed for a long trouble free life while still controlling compatible aggressive fluids.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
ADDITIONAL
RESOURCES
Series APVS04

The Spartan Scientific Series APVS04 is an inert gas/spring operated, Single Acting Normally Closed, or Double Acting media compatible diaphragm valve, designed for control of high purity, aggressive and corrosive liquid chemical media. It has a miniature overall footprint, and low dead volume. The Series APVS04 features media compatible composite body, and FKM, NBR, and EPDM elastomers to control the 6mm orifice which afford Cv ratings of .72 that far exceed competitive valves of this type and size. Media pressure ratings range from 0 to 200 psi and pilot pressure is 60 psi minimum. A Normally Open version can be made using a Normally Open pilot valve. In the case of pilot gas failure, the valve will fail closed. In the case where electric power is lost but pilot gas remains, the valve will remain open. Each valve is tested to bubble tight standard ANSI FCI 70-2 Class VI. The Series APVS04 can be controlled by our proven Spartan Scientific 3-way solenoid pilot valve which enhances operation with manual override and indicator lighted connector options, and is used where sampling, draining, or transferring process fluid are performed. An optional magnetic piston is available for end of stroke sensing when combined with the additional valve position sensor.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
ADDITIONAL
RESOURCES
VIEW
PRODUCT
VIDEOS
Series APVS06

The Spartan Scientific Series APVS06 is an inert gas/spring operated, Single Acting Normally Closed, or Double Acting media compatible diaphragm valve, designed for control of high purity, aggressive and corrosive liquid chemical media. It has a miniature overall footprint, and low dead volume. The Series APVS06 features media compatible composite body, and FKM, NBR, and EPDM elastomers to control the 1/2” orifice which afford Cv ratings of 2.45 that far exceed competitive valves of this type and size. Media pressure ratings range from Vacuum to 150 psi and pilot pressure is 60 psi minimum. A Normally Open version can be made using a Normally Open pilot valve. In the case of pilot gas failure, the valve will fail closed. In the case where electric power is lost but pilot gas remains, the valve will remain open. Each valve is tested to bubble tight standard ANSI FCI 70-2 Class VI. The Series APVS06 can be controlled by our proven Spartan Scientific 3-way solenoid pilot valve which enhances operation with manual override and indicator lighted connector options, and is used where sampling, draining, or transferring process fluid are performed. An optional magnetic piston is available for end of stroke sensing when combined with the additional valve position sensor.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
ADDITIONAL
RESOURCES
VIEW
PRODUCT
VIDEOS
Series APVS08

The Spartan Scientific Series APVS08 is an inert gas/spring operated, 2-Way 2-Position Normally Closed (fail safe), Normally Open or Double Acting media compatible diaphragm valve designed for control of high purity, aggressive and corrosive liquid chemical media. With a small overall footprint, and low dead volume, the Series APVS08 features CPVC bodies, and FKM, NBR, EDPM and PTFE diaphragms to control orifice size of 16mm which afford Cv ratings of 4.70 that far exceed competitive valves of this type. Pressure ratings go from 0 to 120 psi and each valve is tested to bubble tight standard ANSI FCI 70-2 Class VI. The Series APVS08 can be controlled by our proven Spartan Scientific 3-way solenoid pilot valve which enhances operation with manual override and indicator lighted connector options. The Normally Closed version features an optical position indicator showing valve open condition. The Series APVS08 is used where sampling, draining, or transferring process fluid are performed. The Normally Open version function is accomplished by use of a Normally Open solenoid pilot valve. Upon loss of power, namely pilot gas, there is an internal spring that will fail closed in the spring closed version. If this is not a pre-ferred condition, Normally Open fail can be accomplished using a Double Acting version and a 4-way valve plumbed to open on spring return, creating a full Normally Open fail mode. An optional magnetic piston is available for end of stroke sensing when combined with the optional valve position sensor.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
ADDITIONAL
RESOURCES
VIEW
PRODUCT
VIDEOS
Series APVS15

The Spartan Scientific APVS15 is an inert gas/spring operated, Single Acting Normally Closed, or Double Acting media compatible dia-phragm valve designed for control of high purity, aggressive and corrosive liquid chemical media. With a small overall footprint, and low dead volume, the APVS 15 features CPVC bodies, and FKM, EDPM and NBR elastomers to control orifice sizes 16mm and 20mm which afford Cv ratings of 4.70 and 10.9 that far exceed competitive valves of this type. Pressure ratings go from 10 to 100 psi depending on orifice size and each valve is tested to bubble tight standard ANSI FCI 70-2 Class VI. The APVS15 can be controlled by our proven Spartan Scientific 3-way solenoid pilot valve which enhances operation with manual override and indicator lighted connector options. The Normally Closed version features an optical position indicator showing valve open condition. The APVS15 is used where sampling, drain-ing, or transferring process fluid are performed. A Normally Open version can be made using a Normally Open pilot valve. In the case of pilot gas failure, the valve will fail closed. In the case where electric power is lost but pilot gas remains, the valve will remain open. An optional magnetic piston is available for end of stroke sensing when combined with the optional valve position sensor.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
ADDITIONAL
RESOURCES
VIEW
PRODUCT
VIDEOS
Series APV-23

The Spartan Scientific Series APV-23 is 2-way, 2-position valve specifically designed for the control of air, oil or steam The Series APV-23 uses a specially designed Teflon Chevron® seal which ensures separation of the media and pilot sections. In the single acting Normally Closed version, the Series APV-23 uses a spring extended pneumatic operator connected to a sealing disc which when retracted unseats from a precision orifice and allows fluid flow. When pilot pressure is removed from the Series APV-23 the seat returns to the orifice and flow stops. Features of the Series APV-23 are the ON-OFF indicator at the top of the pneumatic actuator and can be used for high temperature liquids compatible with the materials of construction and steam. The stainless steel body is standard and is available in sizes ranging from 1/2” to 2.0” NPT and can control media up to 215 psi in various configurations.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series APV-30

The Spartan Scientific Series APV-30 is a rugged full featured, pneumatically piloted ball valve. The unit is available in Normally Open, Normally Closed or Double Acting versions. The Series APV-30 sizes range from 1/2” to 2.0” NPT. This unit is compact as compared to competitive rack and pinion or motorized ball valves and comes standard with an ON-OFF indicator. The Series APV-30 features PTFE ball valve sealing using Chrome plated brass or 316 Series Stainless Steel balls. The valve body materials are E-Nickel plated brass and 316 Series Stainless Steel.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Series CRDV

The Spartan Scientific Series CRDV (Condensation Removal Drain Valve) is a unique and efficient way to keep your air lines and tanks free of water with this robust electronic timed automatic drain valve. The unit installs in a modular form between an existing coil and connector with a plug and play design and retrofits on virtually any installation. The Cycle and On times are easily adjustable on the compact sandwich timer and features two status indicator lights. The Cycle Time drain has settings to release moisture every 1 to 45 minutes. The On Time setting allows you to set how long you want the valve open, 0.25 to 25 seconds. We offer a variety of Nylon or Brass valves depending on your application. These 2-Way, 2-Position, Normally Closed valves range from 1/4”, 3/8”, 1/2” or 1” NPT and can handle pressures up to 230 psi max. The Series CRDV offers its users the most versatile combination of timing and flow capacities in the industry today, and is proudly made in the USA.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
ADDITIONAL
RESOURCES
Series CRDV/S

The Spartan Scientific Series CRDV/S Condensate Removal Drain Valve keeps your air compressor tank and air lines free of moisture by coupling a state of the art automatic timer with a solenoid valve, reducing rust and clogged air components while increasing compressor cycling and machine life. It features a self-cleaning cycle every 24 hours, status indicator lights, environment resistant design for long cycle life, along with an on board microprocessor from discrete components. As water effluent enters the CRDV/S, the self-learning mode opens the valve more often or less often based on the sensing of the water and demand thereof. The utility, size, ease of installation and price rival the features and cost of conventional timed electric drains.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
ADDITIONAL
RESOURCES
VIEW
PRODUCT
VIDEOS
Series Stepper 12

The Spartan Scientific Stepper 12 Steppervalve is a self-contained Media Separated Electronic Proportional Flow Control Valve designed for highly accurate electronically controlled variable flow control of inert fluids and gases. Using analog or digital signal inputs to produce a linear variable flow output, this combination of a stepper motor, valve body with controller circuit has more than 1,500 positions through its valve stroke which can be dialed down to the step, creating reliable and repeatable flow rates from 0 to 30 GPM (water) @ 150 PSI. The valve features a built-in electronic control that accommodates either open or closed loop control by use of electronic signal input of either 4 to 20 mA, 0 to 10 Volt DC. Valve standard operating voltages are 12 or 24 VDC. The Stepper 12 has a separating diaphragm that maintains dry mechanical movement and is designed for long life and high flow. The diaphragm is designed with a specialized convolution and elliptical flow tip producing a linear flow versus valve stroke position. The Stepper 12 valve body is available in 1/4”, 3/8” or 1/2” port sizes with a maximum flow orifice of 12.5mm. Featuring multi orientation mounting and the quick connect M12 connector mates to the valve for a sure environmentally resistant enclosure to NEMA 4/IP 65. This energy saving valve uses voltage to move into position and needs only 60mA when position is found and maintains a steady state. For fast troubleshooting, the on-board indicator LED (RGB) light ring displays status of the device.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
ADDITIONAL
RESOURCES
VIEW
PRODUCT
VIDEOS
Sample Case

The Spartan Scientific Sample Case is a convenient way to acquire a representative sampling from among our full line of products in one efficient package. Use them as product displays. Let your customers touch, feel and examine them up close to see the Spartan Scientific difference for themselves. Includes sample case bag, essential support literature and two complete trays.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
Featured on Social Media

Spartan's Stepper product evolution continues with the new Stepper 6 Facebook Live introduction. Get a behind the scenes look at the evolution of our Stepper series with an introduction to our new Stepper 6 Series featuring Spartan's National Sales Manager, Jim Kollar.
MORE...

CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
ADDITIONAL
RESOURCES
VIEW
PRODUCT
VIDEOS


Stay up to date with our monthly emails and newsletter


Your email is safe with us, we don't spam


About Us

Products

Engineering Information

Spartan IOT

Contact

Location



SPARTAN SCIENTIFIC

230 McClurg Rd.

Youngstown, OH 44512 United States

(330) 758-8446 (330) 758-3314